Back to all

Fuel Injection Basics for Centerton

June 23, 2024



All modern Centerton vehicles come with fuel injection systems, so it's a topic Centerton drivers need to know something about. The mighty fuel injector is a valve that delivers the gas or diesel fuel to the right place, in the right amount at the right timeto be mixed with air and burned in the engine.

So how many fuel injectors does your vehicle have? There's one for each cylinder. So four, six or eight for most folks in Centerton, Arkansas. Some vehicles have 10 or 12 cylinders. The engine control computer makes adjustments to the fuel injector as it monitors the engine and other sensors. Fuel injectors are a pretty high-tech.

Star Lube Centerton can help Centerton drivers with a fuel injector cleaning service. What's the benefit? In order to work right, the fuel injectors have to deliver the fuel at a precise pressure at a very precise time. It's important that the fuel is sprayed in a particular pattern as determined by the engine design.

Over time, varnish can start to build up in the fuel injectors, effecting the pressure, pattern and timing of the fuel charge. The result is that the fuel doesn't get burned as efficiently as it could. That robs performance and hurts fuel economy.

What about dirty fuel? How does that affect the fuel injectors? The fuel injectors are the last stop in the fuel system. It starts at the fuel tank. Frankly, the best way to keep your fuel injectors working well is to use high quality fuel. It's tempting to shop for bargains in Centerton with fuel prices as high as they are, but major brands in the Centerton, Arkansas, area have better detergents and additives and deliver consistent quality.

What about a good fuel filter? The fuel filter is component of the fuel system. Its job is to filter out the dirt and rust that collect in the fuel tank. If it's clogged up, the dirt will bypass the filter and head upstream to the fuel injectors.

It's important to replace the fuel filter when your manufacturer recommends it. That's part of a comprehensive fuel system cleaning.

There are different kinds of fuel injection systems. Port fuel injection systems, the kind most gasoline engines have, operate at 60 pounds per square inch. The injectors for the new gas direct injection engines Centerton drivers are starting to see require 10 to 30 times as much pressure. And some diesel engines for passenger vehicles have injectors that operate at 30,000 pounds or more per square inch. There's no room for dirt and gum in a precision part like that.

There are a lot of good products available in Centerton, Arkansas, that can clean fuel injectors. They're best used to prevent fouling in the fuel injectors. Many can't clean a seriously gummed up injector – that requires a professional deep cleaning, like those we offer at Star Lube Centerton in Centerton. But putting the cleaner in the fuel tank after you've had Star Lube Centerton take a look at your fuel system will help keep it clean. Be sure to read the label for directions.

Give us a call if you think your vehicle may be ready for a fuel injector cleaning.

 

Star Lube Centerton
550 W Centerton Blvd
Centerton, Arkansas 72719
479-795-1060
http://www.starlubecenterton.com

 

Need Service?

Request a Quote

More articles from Star Lube & Auto Repair

That Squeal is Telling You Something (What Causes Squealing While Steering)

September 1, 2024

If you hear a squealing noise when you turn your vehicle, it's trying to tell you something is wrong. After all, it never made that noise before, right? The sound you hear may becoming from a few sources. Let's take a look (or a listen) to some of the possibilities. First, you almost certainl... More

Fuel Filter Service in Centerton, Arkansas

August 25, 2024

There are a surprising number of small, inexpensive parts that can lead to expensive engine damage when they fail. It doesn't seem right.Fortunately a lot of those things can be taken care of in routine maintenance. They may not be easy to remember because it is a long list, but your service cent... More

It Is Time to Check Your Intervals

August 18, 2024

Part of the engineering that goes into designing a vehicle is testing the components to ensure that they meet durability and safety standards. Because of this, manufacturers have a good idea as to how long the parts in your vehicle will last under normal driving conditions. For this reason, they... More